Loading...
News

How to do a good job of moisture-proof protection and maintenance for LED displays

How to do a good job in the moisture-proof protection and maintenance of the LED display? Because the weather often rains or the room is not ventilated, there is a lot of water vapor in the air, and the water vapor will stay on the circuit board, which will easily cause the circuit board to become moldy and cause performance failure! Therefore, in order to ensure that the LED display can emit bright light even in humid air, regular lighting and maintenance must be done to prolong the service life of the LED display !

1. It is recommended to start and run at least twice a week, and the lighting time is about 2 hours.

2. The LED display is composed of a single lamp bead. If it is not used for a long time, it is very likely that the lamp will be broken and a large number of lamp beads will be damaged when it is activated again.

3. Especially in the rainy season, the humidity in the air is very high, and the water vapor will adhere to the LED display, which will cause the components to corrode or even be scrapped.

4. When the LED display is lit, it will generate heat, which can quickly evaporate the water vapor attached to the LED display, reduce the humidity of the indoor environment, and prolong the service life of the display.

5. Please pay attention when turning on and off the LED display: turn on the screen first, then turn on the screen, turn off the screen first, then turn off the screen
Please leave your information, we will contact you soon!